QC/T 897-2011.Technical specification of battery management system for electric vehicles.1范围QC/T 897规定了电动汽车用电池管理系统的术语与定义、要求、试验方...
QC/T 896-2011.Interface of electrical machine system for electric vehicles.1范围QC/T 896规定了电动汽车用驱动电机系统的电气接口型式、信号定义,对驱动电机...
QC/T 895-2011.On-board conductive charger for electric vehicles.1范围QC/T 895规定了电动汽车传导式车载充电机(以下简称车载充电机)的基本构成、参数、要...
QC/T 894-2011.On-board measurement methods for emissions from heavy-duty hybrid electric vehicles.1范围QC/T 894规定了混合动力电动汽车在底盘测功机或场地上进行车...
QC/T 893-2011.Failure classification and assessment of electrical machine system for electric vehicle.1范围QC/T 893规定了电动汽车用驱动电机系统故障的确认原则故...
QC/T 892-2011.Open end blind rivets with break pull mandrel and protruding head for plastic parts.1范围QC/T 892规定了塑料件用开口型平圆头抽芯铆钉的型式与尺寸、...
QC/T 891-2011.Welding screws for plastic.1 范團QC/T 891规定了塑料用焊接螺钉的型式与尺寸、技术条件。QC/T 891适用于与具有螺纹规格为NST3~NST6底孔的塑...
QC/T 890-2011.Plastic expansion nut with open end-Type D.1范围QC/T 890规定了D型通孔式嵌装塑料螺母的型式与尺寸、技术条件。QC/T 890适用于与NST4.5~ NST7自...
QC/T 889-2011.Retainers for shafts-Type A.1范围QC/T 889规定了A型轴用挡圈的型式与尺寸、技术条件。QC/T 889适用于轴径d为4mm~16mm的A型轴用挡圈。2规范性...
QC/T 888-2011.All-metal hexagon collar weld nuts-Prevailing torque type.1范围QC/T 888规定了焊接六角凸缘锁紧螺母的型式与尺寸、技术条件。QC/T 888适用于螺纹...
